Showing 97–108 of 123 results
-
Pneumatic Paint Stirrer (Up to 40 liters)
Read moreDescription:
Pneumatic Paint Stirrer
1.This Pneumatic mixer used for mixing paint, coating materials, etc.
2.It comes with stand and shafts, The height of the stand can be adjusted.
3.It suitable for agitating paint or fluid of many kinds during spraying process, esp.Specification:
Mixer Type: Homogenizer
Working: High Speed Mixer
Stirring Type: Spiral
Application: Liquid with Suspended SolidsImpa Code: 270581
-
Pneumatic Piston Pump with Drum
Read moreProduct Description:
PNEUMATIC PISTON PUMP
Made with a robust structure, the motor body is made with either alloy metal,Pneumatic piston pump is Ideal for delivering fuel to oil burners as well as to take out water or oil from drums or other containers. Furnished air valve cock and air hose nipple, however, the related drum joint and pipe for the drum can be sold separately. Pneumatic Piston Pump is driven by compressed air. It can be used in extracting or inputting lubricant from barrel. The part which connects with liquid is made of Aluminum, other Seal part of the tool is made of NBR. This tool does not apply to the liquid which can dissolve these two materials.Application:
For transferring oils or liquids of any kind on ship, delivering fuel to oil burners as well as to take out water or oil from drums or other containers.(1) The max air pressure is 0.7Mpa. If the air pressure is too high, the tool is easy to be damaged to shorten the longevity of the tool.
(2) Shut the air source after work or not work for a long time, then release the air in the tool. The user will responsible for the situation if the air compressor is not shut down.
(3) Try your best to prevent the tool running freely in case of affecting the longevity of the tool.
(4) The tool is not suitable for gasoline, kerosene, and liquid which have chemistry melt power. Do not clean the machine with gasoline.Specification:
(1) Tool weight: 3.5kg
(2) Max air pressure: 0.7Mpa
(3) Air pressure: 0.63Mpa
(4) Discharge capacity: 55 L/min(water)
(5) Whorl connector: G3/4″
(6) Hose diameter: 10mmImpa No: 591661
-
Pneumatic Scaling Hammer
Read moreModel: SP-S2
Description:
Pneumatic scaling hammers Single Head The SEMPO Air Scaling Hammer / Air Scrabblers SP-S2 with One Head can be used to remove rust and paint debris on ships, iron frames bridges and boilers. It can also be used to chisel lychee surface of concrete or stone. One Head Pneumatic Scaling Hammers (7200bpm).
1. Air driven
2. Suitable for the removal of old paint and rust
3. Recommended air pressure is 0.6-0.8MPa
4. The air hose nipple is furnished as a standard accessoryFeatures:
Strong, lightweight with a single reciprocating piston and grip ring throttle. Delivers rapid vibratory action which effectively removes old paint, rust and scale from structural steel, boilers,tanks and castings. No chisels required as hammer piston itself can act as the chisel.Application:
Air Scaling Hammer, Air Scrabblers can be used to remove the ship, iron frame, bridges and boilers on the rust and paint debris. Can also be used for road and bridge works, tunnels and box girders, culverts and other types of concrete buildings of the plane, facade, curved surface playing sand chisel or litchi surface stone chisel.
1. Hold with both hands.
2. Connect the compressed air source and press the bottom switch to work. With the high hardness and strong rust removal hammer head, it is easy to remove the stubborn rust on the surface.
3. Wear protective equipment before use.Impa No: 590382
-
Pneumatic Vacuum Cleaner
Read moreProduct Description:
A compact and lightweight industrial vacuum cleaner which works on compressed air. Capable of cleaning off water, oil, and bottom sludge as well as dust and metal chippings. It will even vacuum explosive materials as long as the machine is properly grounded from electrical current. Made of a unique design permitting the use of an ordinary pail can with an outside diameter of 300 mm to collect the dust and waste. Furnished with a pail can, 2 meters of oil resistant hose, and an oil stopper which automatically stops suction when the receiver becomes full.meters of oil resistant hose, and an oil stopper which automatically stops suction when the receiver becomes full.Model: CV-500
Filtering Frequency: Single Filtered
Filter Type: Water Filter
Feature: Handle Control
Impa No: 590722 -
Portable Multi Gas Detector
Read moreBrand: BOSEAN
Model: BH-4A
Features:
Portable Multi-gas Detector for CO, H2S, 02 and LEL
• Advanced MCU for Low-Power Consumption
• LCD display
• Self-Test Function
• Adjustable alarms
• Two Instant Alarm Points
• Audio, Visual LED and Vibratory Indicators
• Three buttons Operation for Simple Use
• Strong, Durable Rubber Casing Provides Anti-Slip Handle ability
• 500pcs alarming record data logger Module monitoring, Sensor setup, Alarm record
• Available for CO, H2S, O2 and combustible gas
• Rechargeable
• Comply with ATEXSpecifications:
Range:
O2: 0-30% by Volume LEL: 0-100% LEL
CO: 0-1000 ppm H2S: 0-100 ppm
Alarm Point:
CO: 35 and 200 ppm instant H2S: 10 and 15 ppm instant
O2: 19.5 by Vol. decreasing and 23.5% by Vol. increasing LEL: 20% and 50% LEL
Method of Detection: Diffusion
Sensor: CO, H2S and O2-Electrochemical Combustible Gases-Catalytic
Display: LCD
Temperature: -20°C – 60°C
Humidity: 5 to 95% RH, non-condensing
Power: 3.7VDC 1800mA rechargeable lithium battery
Operating time: Approximately 15 hours Continuous, non-alarm conditions
Charge Time: Approximately 6 hours
Dimensions: 123mm”62mm*30mm
Sound: 85 dB at 1m
Weight: 210g
Ingress Protection: IP65Certificate: ATEX / CE / Calibration Report
Impa No: 330596 / 98
-
Punching Tool Set 6-38mm
Read moreBrand: HOBOND
Description:
Punching Tool Set 6-38mm
Used for punching holes in soft brass, copper, and other soft metals as well as leather, canvas, and gasketing materials. A set for 6 to 38 mm is available as standard, size 40 to 55 mm are available on request and make to order.Impa No: 613056
-
Safety Glow Stick
Read moreDescription:
Ultra-Bright 6 Inch Glow Sticks/Chem Light Sticks with 12 Hour DurationContents: 1 stick+ 1 safe lanyard/ foil bag
Colour: Green / Red / Yellow
Size: 6” (150mm)
Duration: 12hour
Impa Code: 330602
-
Scupper Plug
Read moreMaterial: Stainless Steel
Size: 110mm
Description:
For Sealing The Scupper Holes For Spilled Oil Or Polluted Liquids. Easy To Use,insert Plug In The Drain Hole And Tighten The Handle Until A Slight Resistance Is Felt,the Rubber Plug Will Be Expanded And Held Firmly In Place. The Material Of The Rubber Parts Is Oil-resistant Rubber.Application:
The sealed drain hole is used to prevent oil leakage or contaminated liquid, and it is convenient to use. Insert the drain hole plug into the drain hole and turn the handle, feel resistance, stop when tightening. The rubber bolts should be unfolded and tightened in the correct position.Impa No: 232486
-
Seahorse Workvest
Read moreBrand: Seahorse
Model: WV-10
Type: 3pcs Work Life Vest
Certificate: Yes
Impa No: 331171 -
-
Snake Wire
Read moreDescription: Used for unclogging pipes and drains. The flexible coil of non-corrosive spring steel will remove most obstructions.
Size: 6mm / 10mm
Length: 10meters
Impa No: 174262 / 615204 -
Solas Retro Reflective Tape
Read moreDescription:
Solas Retro-Reflective Tape which reflects light All life-saving equipment (life rafts,Life jackets,etc.) shall be fitted with retro-reflective tapes where it will assist in detection.Product Grade: SOLAS Grade Marine Reflective Tape
Specifications: :
Size: 2″ (50mm) x 45.7mtrs / roll
Colour: Silver
Material: PET PVC AcrylicFeatures:
1. Nano workmanship, traceless adhesive sticker.
2. Strong reflecting, long reflection distance, nearly 300m.
3. Water-resistant, sun-resistant and rainproof, great durability and long service life.
4. Reduce the probability of nocturnally accidental collision.
5. Improve the visuality of vehicle, making you drive safer.Application:
It is widely used in life saving suits, life buoy, life raft. Suitable For Bicycle, Bike, Motorcycle, Truck, Marine Emergency /Life-Saving Products.Impa No: 330186