Showing all 5 results
-
Victor Cutting Attachment 315FC
Read moreBrand: VICTOR
Model: 315FC
Top Features:
• Built-in flashback arrestors — no need for accessory flash arrestors
• Built-in reverse flow check valves — no need for accessory check valves
• Works with all fuel gases. There are pressure restrictions for different gasesSpecifications:
Gas: All
Process(es): Heavy Duty Model 315FC
Part Number: 0382-0034
Length: 11 in./279.4mm
Weight: 18oz
Hose Connection: B 9/16’1-18 (CGA 022 and 023)Impa No: 850251
-
Victor Cutting Tips 1-1-101
Read moreBrand: VICTOR
Model: 1-1-101 (0330-0005) Acetylene Cutting Tip
Description: Cuts up to 3/4 inch thick. To be used with oxy-acetylene torch.
Specifications:
Type: 101
Series: 1
Size: 1
Metal Thickness: 3/4″
Gas Pressure – Acetylene: 3-5 psig
Gas Pressure – Cutting Oxygen: 30-35 psig
Gas Pressure – Preheat Oxygen: 4-7 psig
Total Acetylene Consumption: 8-13 cfh
Total Oxygen Consumption: 80-85 cfh
Total Preheat Oxygen Consumption: 9-14 cfhImpa No: 850261
-
Victor Cutting Torch CA2460
Read moreBrand: VICTOR
Model: CA2460
Top Features:
• Forged brass head
• Spiral mixer blends oxygen & fuel
• Smooth cutting valve (push type) • Stainless steel tubes
• Brass coupling nut & double “0” ring tapered seal gives quick gas-tight seal without a tightening wrench
• Length 10.5″ (266.7 mm) – Weight 32 oz. (0.99 kg)
• 8″ cut capacity
• 90-degree head
• Tip series: 1Specifications:
Description: Heavy Duty CA 2460 Cutting Attachment for use with all fuel gases
Part Number: 0381-0816
Cutting Range: 8″/200mm
Tip Series: 1
Head Angle: 90 degree Fuel
Gas Usage: Can be used with all Gas Service fuel gases with the proper cutting tip.Impa No: 850251
-
Victor Flashback Arrestors For Regulators & Torch
Read moreBrand: VICTOR
Model: FBR-1 & FB-1
Description:
Oxy/Fuel regulator-mount Pair Pack. Flashback arrestors and reverse flow check valves provide additional protection against flashbacks. Victor recommends the use of these devices whenever possible. Victor add-on flashback arrestors contain both a reverse flow check valve and a flashback arrestor. Due to the high flow requirements of Victor Heavy Industry torches, it is important to use flashback arrestors that have sufficient flow capacity. It is important to understand the difference between reverse flow check valves and flashback arrestors. Reverse Flow Check Valves: Helps prevent the reverse flow of gases from traveling past the check valve.
Flashback Arrestors: Prevents a flame from traveling past the flashback arrestor in the event of a flashback.Top Features:
• Nut and swivel assembly
• Gas tight O-ring seal
• Threads for connection to regulator
• Stainless steel, sintered filter acts as a flame block
• For preventing flashback from torch to hose
• For all oxygen and fuel welding and cutting torches Includes: Built-In Reverse Flow Check Valve, Nut and Swivel AssemblySpecifications for Flashback Arrestor For Regulator (FBR-1):
Brand Name: . Victor Equipment
Sub Brand: FlameBuster
Item: Flashback Arrestor Set
Type: FBR-1, Heavy-Duty, Regulator Style
Gas Service: Fuel Gas, Oxygen
Inlet Connection: 1/4 Inch FNPT
Outlet Connection: 1/4 Inch FNPT
Connection Thread: 9/16-18 RH/LH
Material: BrassSpecifications for Flashback Arrestor For Torch(FB-1):
Brand Name: Victor Equipment
Sub Brand: FlameBuster
Item: Flashback Arrestor Set
Type: FB-1, Heavy-Duty, Torch Style
Gas Service: Fuel Gas, Oxygen
Inlet Connection: 1/4 Inch FNPT
Outlet Connection: 1/4 Inch FNPT
Connection Thread: 9/16-18 RH/LH
Material: BrassImpa No: 850311
-
Victor Oxygen & Acetylene Regulators
Read moreBrand: VICTOR
Model: ESS4
Top Features:
• Heavy duty, high capacity, single stage design regulator
• Outstanding flow performance provides better flow control across a full range of cylinder pressures, with exceptional sensitivity and precision in delivery pressure • EDGE- regulators offer easy to read gauges with enhanced graphics
• Color-coded knobs for quick gas identification • Safer hand/body positioning for adjusting delivery pressure • The most compact industrial regulators available on the market
• Forged brass body, stainless steel bolts
• Zinc-aluminum alloy housing cap – nearly twice the yield strength of brass
• More consistent flow performance over a wide range of cylinder pressures.
• Regulators meet or exceed industry standards
• Features SLAMT (Shock Limitation and Absorption Mechanism) technology built into the adjusting knob
• Passes all CGA E-4 compliance testing, Heated Oxygen Impact Test, and requirements of the UL 252 Standard for Compressed Gas Regulators
• ESS4 regulators provide high capacity
• Forged brass bodySpecifications:
• Zinc-Aluminum housing cap
• High impact ABS gauge guard
• Stem type seat mechanism
• External self reseating relief valve in high pressure models
• Sintered inlet filter — nickel plated bronze
• Color-coded SLAM impact absorbing safety knob
• Meets or exceeds CGA E-4, UL 252 and ASTM G-175 Promoted Ignition Test
• Ideal for use in industrial and general fabrication, light fabrication, repair, maintenance, structural steel fabrication, and more
• Manufacturer Model#: ESS4-15-300 / 0781-5133
• CGA Inlet: 300
• CGA Outlet: CGA 033 (5/8″ – 18 F LH)
• Inlet Position: Side
• Max Delivery Pressure: 15 psig
• Dimensions: 4″H x 4″L x 6″W
• Weight: 4 lb.Impa No: 850193