Showing all 6 results
-
Anti Corrosive / Petro Tape
Read moreBrand: FaSeal
Description:
FASEAL PETRO TAPE IS DESIGNED FOR PROTECTION AGAINST CORROSION AND THE WATER-PROOFING OF PIPES, FLANGES AND VALVES FOR MARINE USE. THE COMPOUND BASED ON SATURATED PETROLEUM HYDROCARBONS ARE FULLY COATED ON BOTH SIDES OF THE FABRIC CARRIER. THE TAPE IS UNALTERABLE IN COMPOSITION AND PLASTICITY WHEN USING UNDER THE TEMPERATURE SECTION: -50 – 60°C. IT MAY HAVE SLIGHT SUPERFICIAL OXIDATION WHEN APPLIED IN ATMOSPHERE AND RENDERS THE SURFACE LESS TACKY. THE TAPE WILL NOT HARDEN OR CRACK SINCE IT HAS A VERY HIGH DEGREE OF IMPERMEABILITY TO WATER. THE TAPE IS UNAFFECTED BY VIBRATION AND HIGHLY RESISTANT TO MINERAL ACID, ALKALIS AND SALT. WHEN STORING PLEASES KEEP COOL AND DRY TO KEEP THE TAPE IN BEST CONDITION.Specifications:
Size: 50mm (2”) / 100mm (4”) / 150mm (6”)
Length: 10meters【PRODUCT COMPONENT ANALYSIS】
1、ADHESIVE: 30%
2、RESIN: 15%
3、ANTISEPTIC: 5%
4、FILLING MATERIAL: 20%
5、PLASTIC NET FILM:30%Impa No: 812471/72/73
-
Anti Splashing Tape / Spray Stop Tape
Read moreDescription:
Anti-splashing Tape/ Spray Stop Tape: Anti-splashing Tape/ No Fire Tape is perfect anti-splashing for combustible oil. For preventing outbreak of a fire caused by a splash of combustible oil, such as fuel oil, lubricating oil, etc. from oil pipes connected to an engine or a generator in a ship’s engine room.Feature:
Amended SOLAS regulation IIU-2/15.2 11 stipulate that oil fuel line shall be screened or otherwise suitably protected to avoid as far as practicable oil spray or oil leakage onto hot surfaces, into machinery air intakes, or other sources of ignition. Pipings, valves, pressure gauges, or any other auxiliary parts become loose due to vibration, fatigue, deterioration of material,excess tension, and tend to be damaged with a pinhole or crack. Covering with this anti-splashing tape to protect the exhaust pipe and other high temperature equipments from being exposed to splashes of combustible oil and preventing possible occurrence of a fire. The tape consists of aramid woven cloth superimposed with aluminium foil on both sides, and an adhesive agent is applied to one side and covered by a separator film. The tape can withstand prominent pressure of 18 kgf/cm2 when applied properly.Application:
Pipings, valves, pressure gauges, or any other auxiliary parts become loose due to vibration, fatigue, deterioration of material,excess tension, and tend to be damaged with a pinhole or crack. Covering with this anti-splashing tape to protect the exhaust pipe and other high temperature equipments from being exposed to splashes of combustible oil and preventing possible occurrence of a fire.Specification:
Width (mm): 35 / 50 / 75 / 100 / 140
Length: 10mtrs
Pressure: 1.8Mpa (Max)
Temperature: 160 deg.C (Max)Certificate: CCS / ABS / DNV / RINA
Impa No: 871801/02/03/04/05
-
-
Hatch Cover Tape / Ramnek Tape
Read moreBrand: FaSeal
Description:
The function of hatch cover tapes is to protect the metal hatch covers on carriage ships against leakage of water into the carriage area. Extreme weather conditions often damage hatch covers making them prone to leakage which may lead to the damage of goods being shipped. Hatch Cover Tape is a self-adhesive heavy duty sealing tape which can protect goods against damage caused by water leakage. The Tape is a very enduring material and guarantees protection in all weather conditions. The hatch cover tapes is composed of a bituminous mass which has the appropriate viscidity and is protected by polypropylene foil from one side and a release liner from the other. The tape is available in 20-meter rolls 100 and 150mm wide. It consists of 20-meter rolls of bitumen compound coated onto polythene film and interleaved with release paper.Specifications:
Sizes: 100mm (4”) / 150mm (6”)
Length: 20 metersApplications: Extreme weather conditions can cause leakage of your hatch covers, which will lead to the damage of cargo being transported.The Hatch Cover Tape keeps moisture out, and ensures a weather and fume tight hatch seal. A material which gives the highest protection under extreme conditions. All Hatch Cover Tape is tested under practical environment and extreme standards. Hatch Cover Tape can be installed between -45 and 40 :C, and can withstand -15 to 70 °C. Rolls are 20 meter of self-adhesive SBS bitumen rubber compound.
Impa No: 232452 / 53
-
Pipe Insulation Tape For High Temperatures
Read moreBrand: FaSeal
Description:
Quick and easy way to insulate high temperature surfaces of pipes or valves in vessel engine rooms. For use on bent and flanged pipes in areas where maintenance is not a consideration and/or space is limited. Made from bio soluble vitreous silicate fiber which is reinforced with an outer jacket of heat sealed aliminium foil. Rated for use to 1,000°C maxSizes:
1. 50mm*3mm*7.7m 48/box 1000°C
2. 100mm*12mm*3.3m 24/box 1000°C
3. 300mm*25mm*7.7m 2/box 1000°CImpa No: 813871 / 72 / 73
-
Solas Retro Reflective Tape
Read moreDescription:
Solas Retro-Reflective Tape which reflects light All life-saving equipment (life rafts,Life jackets,etc.) shall be fitted with retro-reflective tapes where it will assist in detection.Product Grade: SOLAS Grade Marine Reflective Tape
Specifications: :
Size: 2″ (50mm) x 45.7mtrs / roll
Colour: Silver
Material: PET PVC AcrylicFeatures:
1. Nano workmanship, traceless adhesive sticker.
2. Strong reflecting, long reflection distance, nearly 300m.
3. Water-resistant, sun-resistant and rainproof, great durability and long service life.
4. Reduce the probability of nocturnally accidental collision.
5. Improve the visuality of vehicle, making you drive safer.Application:
It is widely used in life saving suits, life buoy, life raft. Suitable For Bicycle, Bike, Motorcycle, Truck, Marine Emergency /Life-Saving Products.Impa No: 330186
