Showing 13–19 of 19 results

  • Pneumatic Needle Scaler (JEX-28)

    Model: JEX 28 / JEX 66

    Description:
    • You can use a jet chisel to remove slag and spatter from welding.
    • Perform shot peening after welding.
    • Remove rust, paint, cast sand from the irregular metal surfaces.
    • Peel off adhered concrete. Clean brick surfaces and stone structures.
    • Furthermore, you can also use it for operation in difficult-to-operate areas where no other tool would be feasible. It includes things in the narrow difficult-to-reach areas, extremely irregular surfaces, and grooves. cracks. and other exterior surfaces without containers. etc.

    Specification:
    Type: Heavy-duty Model
    Air Consumption (No load): 0.35m3/min
    Stroke Speed (No load): 4500 r/min(min-1)
    Sound Pressure Level (Load): 95 dB(A)
    Same Power Level (Load): 106 dB(A)
    Vibration Level: 17.5(2.2) m/s2[m/s2]
    Mass (Weight): 3.5kg
    Standard Needles: 3mm x 180mm (23 pieces)

    Impa No: 590464

    Read more

  • Pneumatic Paint Stirrer (Up to 40 liters)

    Description:
    Pneumatic Paint Stirrer
    1.This Pneumatic mixer used for mixing paint, coating materials, etc.
    2.It comes with stand and shafts, The height of the stand can be adjusted.
    3.It suitable for agitating paint or fluid of many kinds during spraying process, esp.

    Specification:
    Mixer Type: Homogenizer
    Working: High Speed Mixer
    Stirring Type: Spiral
    Application: Liquid with Suspended Solids

    Impa Code: 270581

    Read more

  • Pneumatic Piston Pump with Drum

    Product Description:
    PNEUMATIC PISTON PUMP
    Made with a robust structure, the motor body is made with either alloy metal,Pneumatic piston pump is Ideal for delivering fuel to oil burners as well as to take out water or oil from drums or other containers. Furnished air valve cock and air hose nipple, however, the related drum joint and pipe for the drum can be sold separately. Pneumatic Piston Pump is driven by compressed air. It can be used in extracting or inputting lubricant from barrel. The part which connects with liquid is made of Aluminum, other Seal part of the tool is made of NBR. This tool does not apply to the liquid which can dissolve these two materials.

    Application:
    For transferring oils or liquids of any kind on ship, delivering fuel to oil burners as well as to take out water or oil from drums or other containers.

    (1) The max air pressure is 0.7Mpa. If the air pressure is too high, the tool is easy to be damaged to shorten the longevity of the tool.
    (2) Shut the air source after work or not work for a long time, then release the air in the tool. The user will responsible for the situation if the air compressor is not shut down.
    (3) Try your best to prevent the tool running freely in case of affecting the longevity of the tool.
    (4) The tool is not suitable for gasoline, kerosene, and liquid which have chemistry melt power. Do not clean the machine with gasoline.

    Specification:
    (1) Tool weight: 3.5kg
    (2) Max air pressure: 0.7Mpa
    (3) Air pressure: 0.63Mpa
    (4) Discharge capacity: 55 L/min(water)
    (5) Whorl connector: G3/4″
    (6) Hose diameter: 10mm

    Impa No: 591661

    Read more

  • Pneumatic Scaling Hammer

    Model: SP-S2

    Description:
    Pneumatic scaling hammers Single Head The SEMPO Air Scaling Hammer / Air Scrabblers SP-S2 with One Head can be used to remove rust and paint debris on ships, iron frames bridges and boilers. It can also be used to chisel lychee surface of concrete or stone. One Head Pneumatic Scaling Hammers (7200bpm).
    1. Air driven
    2. Suitable for the removal of old paint and rust
    3. Recommended air pressure is 0.6-0.8MPa
    4. The air hose nipple is furnished as a standard accessory

    Features:
    Strong, lightweight with a single reciprocating piston and grip ring throttle. Delivers rapid vibratory action which effectively removes old paint, rust and scale from structural steel, boilers,tanks and castings. No chisels required as hammer piston itself can act as the chisel.

    Application:
    Air Scaling Hammer, Air Scrabblers can be used to remove the ship, iron frame, bridges and boilers on the rust and paint debris. Can also be used for road and bridge works, tunnels and box girders, culverts and other types of concrete buildings of the plane, facade, curved surface playing sand chisel or litchi surface stone chisel.
    1. Hold with both hands.
    2. Connect the compressed air source and press the bottom switch to work. With the high hardness and strong rust removal hammer head, it is easy to remove the stubborn rust on the surface.
    3. Wear protective equipment before use.

    Impa No: 590382

    Read more

  • Punching Tool Set 6-38mm

    Brand: HOBOND

    Description:
    Punching Tool Set 6-38mm
    Used for punching holes in soft brass, copper, and other soft metals as well as leather, canvas, and gasketing materials. A set for 6 to 38 mm is available as standard, size 40 to 55 mm are available on request and make to order.

    Impa No: 613056

    Read more

  • Scupper Plug

    Material: Stainless Steel

    Size: 110mm

    Description:
    For Sealing The Scupper Holes For Spilled Oil Or Polluted Liquids. Easy To Use,insert Plug In The Drain Hole And Tighten The Handle Until A Slight Resistance Is Felt,the Rubber Plug Will Be Expanded And Held Firmly In Place. The Material Of The Rubber Parts Is Oil-resistant Rubber.

    Application:
    The sealed drain hole is used to prevent oil leakage or contaminated liquid, and it is convenient to use. Insert the drain hole plug into the drain hole and turn the handle, feel resistance, stop when tightening. The rubber bolts should be unfolded and tightened in the correct position.

    Impa No: 232486

    Read more

  • Standard Needles for Jet Chisel

    Material: Mild Steel
    Size: 3mm x 180mm
    Quantity per Box: 100pcs/box
    Impa No: 590468

    Read more